![omniSLIM_fv](https://www.eurothermdev.co.uk/wp-content/uploads/2018/10/omniSLIM_fv.jpg)
![omni-34](https://www.eurothermdev.co.uk/wp-content/uploads/2018/10/omni-34.jpg)
Omni Series
Omni Series Signal Conditioners
Signal Conditioners apply across a range of requirements; amplifying or splitting signals, conditioning sensor outputs, isolating grounding problems, or adding more drive to current loops.
Welcome to the Indian Website
We have detected that you may prefer the Global site. Please use the language dropdown above to change your selection if required.
Omni Series Signal Conditioners
Signal Conditioners apply across a range of requirements; amplifying or splitting signals, conditioning sensor outputs, isolating grounding problems, or adding more drive to current loops.
A ground loop can occur if more than one ground connection is made to a single control signal. Because grounds are seldom at the same potential, an unwanted current will be generated and interfere with the control signal. Signal isolators break the ground loop current path and maintain the integrity of the measurement.
Isolators incorporate low pass filters that eliminate high frequency EMI/RFI and unwanted signals from power lines, generators and motors.
Many sensors output a signal that is not linearly related to the engineering value being measured. For example, a thermocouple used to measure temperature has a nonlinear millivolt output. A thermocouple input signal isolator translates this to a standard robust linear signal such as 4 to 20 MA.
Industrial applications use a wide array of sensors to measure temperature, flow, length, speed etc. These signals may then need to be converted into a form usable by the instrumentation to which they are connected. Any sensor signal (thermocouple, RTD, DC voltage, DC current) can be converted to any standard process signal.
Special Features | Signal splitters, Isolation Linearisation |
---|---|
Mounting | DIN rail |
Input Type | DC Volts/Current, RTD, Thermocouple |
Output Types | 0-20mA, 0-5V dc, 4-20mA dc |
Isolation | 2500V Input/Output and channel/channel |
Power Rating | Loop or 16.8 to 31.2V dc |
Wiring | Fixed terminals |
Calibration via | Lifetime cal |
Product Selector
Our tool will match the best product to your needs
Launch product selectorContact Us