Hai bisogno di aiuto per scegliere il prodotto giusto?
Il nostro strumento ti aiuterà a trovare il prodotto più adatto alle tue esigenze
Accedi allo strumento di selezione dei prodottiBenvenuto sul sito Italiano
Abbiamo rilevato che potresti preferire il sito Global. Se necessario, utilizza il menu a tendina delle lingue per modificare la scelta.
The FDA and other regulatory bodies require not only accurate measurement and storage of room parameters but if the storage medium is electronic then the methods used must comply with FDA 21 CFR Part 11.
Stability Monitoring of medicinal products is an area also addressed by the ICH (International Conference on Harmonization of Technical Requirements for Registration of Pharmaceuticals for Human Use) and the ICH final guidance (agreed Feb 2003), is now being adopted across Europe, Japan and the United States.
The FDA also states in its 21 CFR part 203 section that manufacturers, authorized distributors of drugs and their representatives shall store and handle all drug samples under conditions that will maintain their stability, integrity and effectiveness, and ensure that the drug samples are free of contamination, deterioration and adulteration.
With environmental chambers, temperature, humidity, particle counts, differential pressure, lighting, gas levels and other environmental conditions can be monitored. This can be extended to equipment required to detect toxic gases and fume hood positions.
Regulatory bodies require that stability facilities have to meet the following criteria:
Measurement and recording of temperatures is vital to the storage of perishable goods, but there is more than one way to record an average.
The ICH defines the mean kinetic temperature as being “a single derived temperature that, if maintained over a defined period of time, affords the same thermal challenge to a drug substance or drug product as would be experienced over a range of both higher and lower temperatures for an equivalent defined period”.
MKT expresses the cumulative thermal stress experienced by a product at varying temperatures, during storage and distribution. It differs from other means (such as a simple numerical average or arithmetic mean) in that higher temperatures are given greater weight in computing the average, thus, recognizing the accelerated rate of thermal degradation of materials at higher temperatures.
The mean kinetic temperature is calculated as being:
Tk being the mean kinetic temperature in Kelvin
ÄH is the heat activation in kJoule per mole
R is the universal gas constant in kJoule per mole per Kelvin
T1 and Tn are the temperature samples for periods 1 and n, respectively
n is the total number of periods in the calculation
There are a number of interpretations of how this calculation is achieved using real samples:
Eurotherm offers all the above methods with:
Detecting and announcing abnormal condition is a key requirement for the environmental monitoring systems.
Pharmaceutical companies have adopted various methods for capturing and announcing abnormal conditions. These include:
Strumento di selezione dei prodotti
Il nostro strumento ti aiuterà a trovare il prodotto più adatto alle tue esigenze
Accedi allo strumento di selezione dei prodottiContattaci