Välkommen till Sweden-webbplats
Vi har upptäckt att du kanske föredrar Global-webbplatsen. Använd språkmenyn ovan för att ändra ditt val om det behövs
The compact, 1/32 panel size, 2132 temperature controller uses advanced PID algorithms to give stable ’straight line’ temperature control. Self-tuning is included to optimize the control performance without the need for specialist knowledge or training.
A universal input enables selection of nine internally stored thermocouple types and the PT100 resistance thermometer. Other input linearizations may be factory downloaded. Linear inputs can be scaled to the desired display range.
Two outputs are configurable for heating, cooling or alarms.
Three internal alarm setpoints are provided – configurable as high, low or deviation alarms. Alarms can be ’blocked’ on start-up to prevent unnecessary operator alerts.
Heater failure can be detected using PDSIO when the controller is used with a TE10S Solid State Relay – this negates the need to use extra components such as current transformers.
The operator interface can be customized to present only those parameters that an operator needs to see and adjust, while other parameters are locked away under password protection.
A five mode timer is provided for simple, time-based profiling applications.
Ideal for:
Features:
| Input Type | mA, mV, RTD, TC, Volts |
|---|---|
| Panel size (DIN) | 1/32 |
| PV Accuracy | <0.25% |
| IP Rating | IP65 |
| Display Type | 4 Digit LED |
| Control Types | On/Off, PID |
| Alarm Types | Betygsätta, Dev, Hej, Lo, Sensor Break |
| Supply Voltage | 24V dc/ac, 85-264V ac |
| SP Programmer | – |
| Real Time Clock | – |
| Safety-approvals | None |
| Special Features | None |
| Analogue IP/OP In | 1 |
| Analogue IP/OP Out | 0 |
| Digital IP/OP In | 1 |
| Digital IP/OP Out | 2 |
| Digital Comms | None |
| Maths Equation | None |
| Combinational Logic | Ingen |
| Timers/Counters/Totals | None |
| PC Configuration | List based |
Contact Us
