TE200S Solid State Relay
TE200S Two Leg, Three Phase Solid State Relay
The TE200S is a Solid State Contactor designed for general purpose three phase applications using three wire resistive loads.
Two of the three phases are switched by the TE200S, the third being directly connected.
Description
- Ergonomic design
- DC or AC logic input signal
- Firing mode: Logic ON/OFF, zero crossing firing with LED indication
- Nominal current per phase – 16-63A at 45°C
- Supply voltage 200Vac to 500Vac
It is an ideal replacement for a mechanical or mercury contactor, accepting DC or AC logic input signals.
The TE200S is robust, compact, convenient and reliable. It is easily integrated into a control system because of its compact size, simplicity of wiring and convenient DIN rail or bulkhead mounting.
Ideal for:
- Heat treatment
- Metallurgy
- Plastics
- Foods processing
- Environmental temperature control
Specification
| Digital Comms | None |
|---|---|
| Maximum Current (Amps) | 500A |
| Maximum Voltage (Volts) | 500V |
| Controlled Phases | 2 |
| PLF and/or PLU | No |
| Diagnostics | No |
| Alarm Types | Nej |
| Input Analogue | No |
| Input Logic | Yes |
| Firing Mode Burst Firing | Yes |
| Heater Type Constant Resistance | Yes |
| Heater Type SWIR | Yes |
